cont_delay_synapse

Command: cont_delay_synapse


Transmits
SpikeEvent RateEvent CurrentEvent ConductanceEvent DoubleDataEvent

References
none
Description

cont_delay_synapse relaxes the condition that NEST only implements delays
which are an integer multiple of the time step h. A continuous delay is
decomposed into an integer part (delay_) and a double (delay_offset_) so
that the actual delay is given by delay_*h - delay_offset_. This can be
combined with off-grid spike times.

Example:
0 << /resolution 1.0 >> SetStatus

/sg /spike_generator << /precise_times true /spike_times [ 2.0 5.5 ] >> Create def
/n /iaf_psc_delta_canon Create def
/sd /spike_detector << /precise_times true /record_to [ /memory ] >> Create def

/cont_delay_synapse << /weight 100. /delay 1.7 >> SetDefaults
sg n /cont_delay_synapse Connect
n sd Connect

10 Simulate

sd GetStatus /events/times :: == % --> <. 3.7 7.2 .>

File
models/cont_delay_connection.h
Author
Abigail Morrison
Remarks

All delays set by the normal NEST Connect function will be rounded even when using
cont_delay_connection. To set non-grid delays you must either

1) set the delay as synapse default as in the example above
2) set the delay for each synapse after the connections have been created e.g.

sg n 100. 1.0 /cont_delay_synapse Connect
<< /source [ sg ] /synapse_model /cont_delay_synapse >> GetConnections
{ << /delay 1.7 >> SetStatus }
forall

Alternative 1) is much more efficient but all synapses then will have the same delay.
Alternative 2) is slower but allows individual delay values.

Continuous delays cannot be shorter than the simulation resolution.